Home > Solutions and products > Solid fuel production from waste

Solid fuel production from waste.

Pyro-Blok  : A dense, energy rich solid fuel!

 

A small scale solid fuel production process solution to reduce enery costs, reduce land fill volumes and contribute to reductions in GHG emissions.

WHY PAY FOR ENERGY WHEN YOU POSSESS IT ALREADY?

Today's issue:  Energy is costly.  A reliable, clean and cost effective source of fuel is needed. This fuel needs to withstand storage conditions.   

Our Solution:  THE Pyro-Blok  PROCESS 

A solid fuel alternative to fuel oil or propane, and a complement to wood chips that is a secure source of fuel in the form of recycled waste.

Our process establishes a value chain in the form of clean, dense,  logistically efficient solid fuel. This process reduces waste volumes subject to land filling fees, and reduces total tons of equivalent carbon (tCO2e) that would otherwise be released to the atmosphere.

The automated Pyro-Blok   production plant, designed for a production rate of 300 kg/hr, leverages various non recyclable urban fiber feedstock's to form briquettes similar in shape to a hockey puck. The process provides a dual redundant solid fuel supply source to sustain urban core boiler house  infrastructure operating on woody biomass within.

 

Pyro-Blok  

 

Process Solutions for all SME businesses and communities

  • Production of briquette pucks 1 inch in length and 50mm ødia for automated industrial boiler plants and/or CHP gasifiers
  • Production of fuel ingots 6 inch in length and 50mm ødia for small manual fed boilers

 

Pyro-Blok   in summary: 

  • An alternate solid fuel ~ 50% cheaper than fuel oil class 2 and 15% cheaper than wood pellets
  • A solid fuel 50% more energetic than wood (%w basis)
  • A clean, renewable fuel, subject to carbon credits
  • A dense, non hygroscopic fuel with an excellent shelf-life
  • Contributes to reducing solid fiber landfill volumes
  • Made from 100% non-toxic, recycled material
  • Contributes to reducing tCO2e as well as GHG offsets (CH4)

 

Please consult the following link to download a short presentation file:

Pyro-Blok  solid fuel plant

 

The solid fuel product provides a feed supply for thermal heat systems for generation of hot water/steam and/or producer gas applications; an alternative to propane, oil and natural gas.

The product can also serve as fuel for home cooking.

 

The following video illustrates the constituents of the small footprint the Pyro-Blok   decentralized micro solid fuel plant plant. i.e. 45ft (length) x 28ft(width)

 

Therméal, located in Quebec, Canada, is the IP owner of the Pyro-Blok process; a solid fuel process derived from densified, post recycling, residual waste biomass such as:

  • food grade waxed cardboard
  • PCBP cardboard (gable top cartons)
  • black sphagnum peat
  • dry sludge powder
  • mixed paper fiber
  • wood

 

The following video illustrates the combustion of 1 kg of solid fuel in a pyro-gasification stove rated to a capacity of  50,000 Btu/hr. The short trial was conducted indoors; without ventilation and/or chimney. The fuel was assembled from waxed cardboard residual waste.

 

Why Pyro-Blok  ?

Cost Efficient: (Your waste becomes your energy)

  • Production of one ton of Pyro-Blok solid fuel is equivalent to the energy content of roughly 450 liters of fuel oil class 2.
  • A normalized fuel: More dense than water  (Density > 1000 kg/Nm3)                
  • Energy value is 15% higher than wood pellets for the same weight of fuel 
    • fuel LCV  20 mmBtu/MT for waxed cardboard feed vs. 17 mmBtu/MT for wood pellets
  • Better resistance to storage compared to wood pellets
  • Land fill costs saving on the waste processed.
  • Pyro Blok improve the combustion efficiency of combustion appliances.

 

 Reduces CO2 Emissions:

  • Each ton of paper/fiber diverted saves 6 cubic meters of landfill space
  • Recycling non recyclable urban solid waste fiber reduces green house gases created in landfills.